Main /
Rubber Carrier for the Dynamic Amplitude Adjuster
Purpose
When making the Dynamic Amplitude Adjuster, this is needed.
These are used with the Dynamic Amplitude Adjuster outlined in the manual, Jigs, Fixtures, & Add-Ons: Volume 1, in the MDF Rose Engine 2.0 Library.
Slicer Notes
|
Item |
Setting |
Comments |
|
Wall loops |
3 |
Need extra wall thickness for the rubbed edge |
|
Infill |
30% |
Need extra support for the screws holding it into place |
|
Enable Support |
Yes |
Helps with the roundness of the holes for screws. |
Files
|
|
eMail comments to me at ColvinTools @ Gmail.com