************** Purpose **************
Purpose
These are attached to the lever arm to rub against the rosettes.
The are used with the amplitude adjuster outlined in the manual, Jigs, Fixtures, & Add-Ons: Volume 1, in the MDF Rose Engine 2.0 Library.
************** Slicer Notes **************
Slicer Notes
|
Item
|
Setting
|
Comments
|
|
Wall loops
|
3
|
Need extra wall thickness for the rubbed edge
|
|
Infill
|
30%
|
Need to be rugged enough
|
************** Files **************
Files
The file noted below can be used with Fusion 360 to make your own shapes.
The STL files needed to make the pre-defined shapes are below.
*************************************************
************** Simple Point Rubber **************
| Simple Point Rubber
AA-Rubber-Point-1.stl
*************************************************
********* Round rubber, 1" diameter point *******
| 
| Round Rubber, 1" Diameter Point
AA-Round-1in-Rubber.stl
*************************************************
************** Elegant Point Rubber **************
|
| More Rounded Point Rubber
AA-Rubber-Point-2.stl
*************************************************
********* Round rubber, 2" diameter point *******
| 
| Round Rubber, 2" Diameter Point
AA-Round-2in-Rubber.stl
*************************************************
*************** Flat rubber *********************
|
| Flat Rubber
AA-Flat-Rubber.stl
*************************************************
********* Round rubber, 3" diameter point *******
| 
| Round Rubber, 3" Diameter Point
AA-Round-3in-Rubber.stl
|
************** Comments **************
Comments
(comments regarding this part)
########## Standard Footer for all pages ##########
eMail comments to me at ColvinTools @ Gmail.com
