Pumping Mechanism Parts
Purpose
These are used for the Nextion display.
Slicer Notes
|
Item |
Setting |
Comments |
|
Wall loops |
3 |
Need extra wall thickness for the rubbed edge |
|
Infill |
30% |
Need to be rugged enough |
Files
|
|
Point Pumping Rubber Simple point rubber. The rubbing edge is also rounded so that the points on the edges do not project into the rubber when it is rocked back and forth during the pumping operation. This is shown in the Near Side View on the left. Image of this rubber installed with a rosette. | ||||
|
|
| ||||
|
|
Ellipse (2" x 1") Pumping Rubber A rounded edge point rubber which is half of a 2" x 1" ellipse. The rubbing edge is also rounded so that the points on the edges do not project into the rubber when it is rocked back and forth during the pumping operation. This is shown in the Near Side View on the left. Image of this rubber installed with a rosette. |
Comments
Instructions for using this are in Instructions for Building ELFOS: Part 1 – Hardware.
|
|
eMail comments to me at ColvinTools @ Gmail.com