Main /
Paul Fletcher Rosette
Purpose
These were submitted to me from John Henderson & Blake Hickerson. I have not tried printing them.
Key Note: When importing 3D CAD files into a slicer, it is recommended to use a STP or STEP file type. Some have reported that STL files are typically not configured for printing very fine resolution on 3D printers as needed for rosettes.
STL & Fusion 360 Files
John Henderson shared these rosette designs.
|
Paul Fletcher |
|
|
DXF Files
Blake Hickerson shared these rosette designs. I have not tried sending DXF files to my 3D printer.
|
|
eMail comments to me at ColvinTools @ Gmail.com