• View
• Edit
• History
• Print

Holtzappfel F Rosettes

************** Purpose **************

Purpose

These were submitted to me from John Henderson & Blake Hickerson. I have not tried printing them.

Key Note: When importing 3D CAD files into a slicer, it is recommended to use a STP or STEP file type. Some have reported that STL files are typically not configured for printing very fine resolution on 3D printers as needed for rosettes.

Holtzapffel F 1 Holtz-F-1-5_RD680_AMP24.f3d Holtz-F-1-5_RD680_AMP24.stl		Holtzapffel F 1 Holtz-F-1-5_RD680_AMP30.f3d Holtz-F-1-5_RD680_AMP30.stl
Holtzapffel F 3 Holtz-F-3.f3d Holtz-F-3.stl		Holtzapffel F 3 Holtz-F-3-0.937-AMPLITUDE.f3d Holtz-F-3%20.937%20AMPLITUDE.stl
Holtzapffel F 4 Holtz-F-4.f3d Holtz-F-4.stl		Holtzapffel F 6 Holtz-F-6.f3d Holtz-F-6.stl
Holtzapffel F 8 Holtz-F-8.f3d Holtz-F-8.stl

DXF Files

Blake Hickerson shared these rosette designs. I have not tried sending DXF files to my 3D printer.

• Holtz-F-1-5_RD680_AMP24.dxf
• Holtz-F-1-5_RD700_Amp30.DXF
• Holtz-F-3 .937 AMPLITUDE.dxf
• Holtz-F-3.dxf
• Holtz-F-4.dxf
• Holtz-F-6.dxf
• Holtz-F-8.dxf

########## Standard Footer for all pages ##########

eMail comments to me at ColvinTools @ Gmail.com