Stepper Motor End Caps with RJ-45 Plugs

************** Purpose **************

Purpose

Stepper Motor End Caps

These were redesigned by Rich Colvin to fit more tightly on Stepper Online's 17HS19 & 23HS30 motors. The opening on the side is for an RJ-45 jack to be used. It provides a clean look with a simple jack which allows an off-the-shelf CAT-5 or CAT-6 Ethernet cable to used to connect the stepper motor to the controls box.

Other Required Materials

The RJ45 panel adapter fits a standard keystone RJ-45 connector.

If using a different connector, you may need to re-design the opening.

Slicer Notes

Item	Setting	Comments
Infill	15%	This is sufficient.
Enable Support	Yes	Type = Tree (auto) Style = Default

Colour Printing Notes

It is recommended that you print these in different colours, depending on the stepper motor's use.

************** Row 1 **************

Spindle	Black	Rosette Drive	White ************ Row 2 ************
X Axis	Blue	Z Axis	Green ************ Row 3a ************
Configurable Axis 1 /	Red	Configurable Axis 2 /	Yellow ************ Row 3b ************
ELFOS Motor 3		ELFOS Motor 4	************ Row 4 ************
Configurable Axis 3	Pink	Configurable Axis 4	Purple

************** Files **************

Files

You can click on the pictures below to see bigger versions.

NEMA 17 Endcap		NEMA 23 Endcap
	Single Shaft Motors EndCap_17HS19.f3z EndCap_17HS19.stl EndCap_17HS19.3mf		Single Shaft Motors EndCap_23HS30.f3z EndCap_23HS30.stl EndCap_23HS30.3mf
			Spindle & Rosette Phaser/Multiplier Motors (corner cut off to fit in to the headstock) EndCap_23HS30_Spindle.f3z EndCap_23HS30_Spindle.stl EndCap_23HS30_Spindle.3mf
	Double Shaft Motors EndCap_17HD19.f3z EndCap_17HD19.stl EndCap_17HD19.3mf		Double Shaft Motors EndCap_23HD30.f3z EndCap_23HD30.stl EndCap_23HD30.3mf

3MF = 3D Manufacturing Format